Humic acid in ice: Photo-enhanced conversion of nitrogen dioxide into nitrous acid

Laboratory studies on the heterogeneous conversion of nitrogen dioxide into nitrous acid on irradiated ice films containing humic acid are described. It was found that the presence of light in the visible range of the solar spectrum significantly enhances the rate of nitrous acid release from a humic acid doped ice film. This process might contribute to observed HONO production in snow, where the NO₂ is thought to originate from nitrate photolysis. Analysis of the experimental data based on the Langmuir Hinshelwood model framework allowed quantification of the observed dependencies of the nitrous acid production rate on nitrogen dioxide concentration. The observed dependencies on the humic acid concentration as well as on the irradiation intensity were used to estimate light-driven HONO fluxes for environmental snow covers.     

Controlled Enrichment System for Experimental Fumigation of Plants in the Field with Sulfur Dioxide

A prototype Free-Air Controlled Enrichment (FACE) system was developed at Brookhaven National "Laboratory (BNL) for the experimental control of gas concentrations in an open field, without any form of enclosure. This FACE system consists of a toroidal plenum chamber, 15 m in diameter, with a series of 32 vertical vent pipes from which the release of a test gas can be controlled. Data on gas concentration at the center of the array and wind velocity are fed to a microprocessor where a proportional, integrative, differential (PID) algorithm is used to regulate a mass-flow controller. Data on wind direction are used to control the opening and closing of the vertical vent pipes to maintain an upwind release. In 72 hours of continuous operation during which wind velocity varied between 0.3 to 8 m sec^-1, the FACE prototype maintained 1 -min averaged concentrations within twenty percent of the 40 ppb set point 94 percent of the time.     

Product Guide/1975

Measurements conducted on full-scale hazardous waste incinerators have occasionally shown a relationship between carbon monoxide (CO) emissions and emissions of toxic organic compounds. In this study, four mixtures of chlorinated C₁ and C₂ hydrocarbons were diluted in commercial-grade heptane and burned in a water-cooled turbulent flame reactor (TFR) under two different excess air levels. No correlation between CO and organic emissions could be discerned. Reasons for this lack of observable correlations are discussed in terms of combustion and chemical reaction kinetic theory.     

Control of Contaminant Emissions From Fossil Fuel-Fired Boilers

The importance of fuels combustion was brought into sharp focus recently in a report on air pollution to the United States Senate in which it was stated, “These processes replace usable air with potentially harmful pollutants, and the capability of the atmosphere to disperse and dilute these pollutants—especially in urban areas where people, vehicles, and industries congregate in even greater numbers—is strictly limited.”¹ The overwhelming burden of emissions of sulfur compounds, as well as nitrogen compounds and particulate matter in the U. S. today, originates from the burning of coal and fuel oil in stationary combustion sources. Thus, combustion has a large influence on the quality of the atmosphere in most urban areas. The air pollution effects of these contaminants are many and varied and all are objectionable and undesirable. Without a doubt, the most serious air pollution problem in the nation today is that created by the combustion of fossil fuels.     

The impact of urbanization on tropical mangroves (Fortaleza,Brazil): Evidence from PAH distribution in sediments

This investigation represents the first environmental diagnosis of the distribution and sources of polycyclic aromatic hydrocarbons (PAHs) in sediments from a tropical mangrove in Fortaleza, northeastern Brazil. Sediment cores from six sampling stations in the Cocó and Ceará Rivers were retrieved in June-July 2006 to determine 17 priority PAHs. The total PAH concentrations (Σ_PAHs) ranged from 3.04 to 2234.76 μg kg^?1(Cocó River) and from 3.34 to 1859.21 μg kg^?1 (Ceará River). These levels are higher than those of other cities with more industrial development. PAH concentrations did not reach probable effect levels (PELs). However, from 4.5 to 87.5% of individual PAH concentrations can occasionally cause adverse biological effects for aquatic organisms. The PAH molecular ratios indicate that the PAHs in the sediment core were derived mainly from petroleum, wood, and charcoal combustion (pyrogenic source), and that atmospheric deposition and urban runoff may serve as important pathways for PAH input to the sediment. Clearly, the Σ_PAHs in sediments collected in the Cocó and Ceará Rivers indicate that ongoing pollution is more severe than past pollution.     

Identification of air pollutant sampling period using horizontal dilution potential

A new model is proposed for estimating horizontal dilution potential of an area using wind data. The mean wind speed and wind direction variation are used as a measure of linear and angular spread of pollutant in the atmosphere. The methodology is applied to monitored hourly wind data for each month of 1 year for wind data collected at Vadodara, Gujarat and monthly dilution potential is estimated. It is found that there is a gradual variation of horizontal dilution potential over a year with limited dilution during post monsoon period i.e., October and November and a high dilution in pre monsoon period i.e., May and June. This information can be used to design air quality sampling network and duration of sampling for source apportionment study. Air pollutant sampling during high dilution period can be carried out for identifying urban and rural dust and wind blown dust from mining activity. Air pollutant sampling during low dilution period can be carried out for capturing large amount of particulate matter from anthropogenic sources like elevated stack of furnace.     

Ultraviolet absorbance as a proxy for total dissolved mercury in streams

Stream water samples were collected over a range of hydrologic and seasonal conditions at three forested watersheds in the northeastern USA. Samples were analyzed for dissolved total mercury (THg_d), DOC concentration and DOC composition, and UV₂₅₄ absorbance across the three sites over different seasons and flow conditions. Pooling data from all sites, we found a strong positive correlation of THg_d to DOC (r² = 0.87), but progressively stronger correlations of THg_d with the hydrophobic acid fraction (HPOA) of DOC (r² = 0.91) and with UV₂₅₄ absorbance (r² = 0.92). The strength of the UV₂₅₄ absorbance-THg_d relationship suggests that optical properties associated with dissolved organic matter may be excellent proxies for THg_d concentration in these streams. Ease of sample collection and analysis, the potential application of in-situ optical sensors, and the possibility for intensive monitoring over the hydrograph make this an effective, inexpensive approach to estimate THg_d flux in drainage waters.     

A performance evaluation of the National Air Quality Forecast Capability for the summer of 2007

This paper provides a performance evaluation of the real-time, CONUS-scale National Air Quality Forecast Capability (NAQFC) that supported, in part, its transition into operational status. This evaluation focuses primarily on discrete forecasts for the maximum 8-h O₃ concentrations covering the 4-month period, June through September, 2007, using measurements obtained from EPA's AIRNow network. Results indicate that the 2007 NAQFC performed as well or better than previous configurations, despite the expansion of the forecast domain into the western half of the nation that is dominated by complex terrain. The mean, domain-wide, season-long correlation was 0.70. When examined over time, the domain-wide correlations exhibit a fairly consistent nature, with values exceeding 0.60 (0.70) over 90% (55%) of the days. The NAQFC systematically over-predicted the 8-h O₃ concentrations, continuing a trend established by earlier NAQFC configurations, though to a lesser degree. The summer-long mean forecast value of 53.2 ppb was 4.2 ppb higher than the observed value, resulting in a domain-wide Normalized Mean Bias (NMB) of 8.7%. Most of the over-prediction is associated with observed concentrations less than 50 ppb. In fact the model tends to under-predict when concentrations exceed 70 ppb. As with the bias, the error associated with the latest configuration was also lower. The summer-long Root Mean Square Error of 13.0 ppb (Normalized Mean Error (NME) = 20.4%) represented marked improvements over earlier forecasts. Examination of the spatial distribution of both the NMB and NME reveals that the NAQFC was generally within 25% for the NME and 25% for the NMB over a majority of the domain. Several areas of poorer performance, where the NMB and NME often exceed 25% and in some cases 50%, were noted. These areas include southern California, where the NAQFC tended to under-predict concentrations (especially on weekends) and the southeast Atlantic and Gulf coasts regions, where the model over-predicted. Subsequent analysis revealed that the incorrect temporal allocation of precursor emissions was likely the source of the under-prediction in southern California, while inaccurate simulation of PBL heights likely contributed to the over-prediction in the coastal regions.     

Method Comparisons for Particulate Nitrate,Elemental Carbon,and PM2.5 Mass in Seven U.S. Cities

ABSTRACT

Methods that measure PM₂₅ mass, total particulate NO₃ ^-, and elemental carbon (EC) were evaluated in seven U.S. cities from 1997 to 1999. Sampling was performed in Bakersfield, CA; Boston, MA; Chicago, IL; Dallas, TX; Philadelphia, PA; Phoenix, AZ; and Riverside, CA. Evaluating and validating methods that measure the components of fine mass are important to the effort of establishing a speciation-monitoring network. The Harvard Impactor (HI), which measures fine particle mass, showed excellent agreement (r² = 0.99) with the PM₂₅ Federal Reference Method (FRM) for 81 24-hr samples in Riverside and Bakersfield. The HI also showed good precision (4.8%) for 243 24-hr collocated samples over eight studies.

The Aethalometer was employed in six of the sampling locations to measure black carbon (BC). These values were compared to EC as measured from a quartz filter using thermal analysis. For the six cities combined, the two methods were highly correlated (r² = 0.94; 187 24-hr samples); however, the BC values were approximately 24% less than the EC measurements consistently across all six cites. This compares well to results observed for EC/BC measurements observed in other semi-urban areas. Par-ticulate NO₃ ^- was measured using the Harvard-EPA Annular Denuder System (HEADS). This was compared to the NO₃ ^- measured from the HI Teflon (DuPont) filter to assess NO₃ ^- artifacts. Significant NO₃ ^- losses (approximately 50% of total NO₃ ^-) were found in Riverside, Philadelphia, and Boston, while minimal artifacts were observed in the other sites. Two types of HEADS configurations were employed in five cities. One system used a Na₂CO₃-coated glass fiber filter, and the other type used a nylon filter to collect volatilized NO₃ ^- from the Teflon filter. The HEADS with the Na₂CO₃-coated filter consistently underestimated the total particulate NO₃ ^- by approximately 20% compared to the nylon HEADS.     

Solvent Extraction Processes: A Survey of Systems in the SITE Program

Solvent extraction of contaminated soils, sludges and sediments has been successfully completed at a number of Superfund sites. Each commercialized process uses a unique operating system to extract organic contaminants from solids. These operating systems may be classified by the properties of the solvents each utilizes: (1) standard solvents, (2) near-critical fluids/liquified gases, and (3) critical solution temperature solvents. Pretreatment and post-treatment requirements vary depending upon the operating systems of the solvent extraction system. Future demonstrations of these technologies by the U.S. EPA’s Superfund Innovative Technology Evaluation Program will provide additional information regarding the efficacy of these processes.